TM 55-2840-254-23
4-37 REMOVE NO. 4 AND 5 BEARING PACKAGE SEALS (AVIM) (Continued) 4-37
18. Remove faceplate (46).
NOTE
in following step (19), tube (48) and
pilot (49) are part of seal removal tool
set (T49).
19. Remove No. 4 and 5 bearing package forward
seal (47) as follows:
a. Position tube (48) on arbor press and place
seal and retainer (44) on tube (48).
b. Install pilot (49) on seal (47). Remove Seal
(47), using arbor press.
GO TO NEXT PAGE
4-195
