TM 55-2840-254-23
4-37 REMOVE NO. 4 AND 5 BEARING PACKAGE SEALS (AVIM) (Continued) 4-37
20. Remove three screws (50), and remove aft seal
and retainer (51).
21. Remove faceplate (52) and seal (53).
NOTE
In following step 22, tube (48) and pilot
(49) are part of seal removal tool set
(T49).
22. Remove No. 4 and 5 bearing package aft seal
(54) as follows:
a. Position tube (48) on arbor press and place
aft seal and retainer (51) on tube (48).
b. Install pilot (49) on seal (54). Remove seal
(54), using arbor press.
GO TO NEXT PAGE
4-196