TM 55-2840-254-23
4-60
REPAIR SECOND TURBINE NOZZLE, SPACER, AND CASE (AVIM) (Continued)
4-60
13. Rotate milling machine (17) clockwise until
front stop is reached.
In following step, do not allow cutter
to project beyond edge of taper in
case. Failure to comply will cause
damage to nozzle during milling
operation.
14. Adjust cutter (22) until forward edge of cutter
reaches edge of taper in case (1) of second tur-
bine nozzle (2). Do not adjust cutter (22)
beyond this point.
GO TO NEXT PAGE
4-374
