TM 55-2840-254-23
4-60
REPAIR SECOND TURBINE NOZZLE, SPACER, AND CASE (AVIM) (Continued)
4-60
16. Press STOP button (25) on control panel (26).
17. Connect control box connector (27) to milling
machine (17).
18. Connect control box (28) to a 110 VAC power
source.
21. Rotate milling machine (17) clockwise until
front stop is reached.
19. Rotate milling machine (17) counterclockwise
until cutter (22) is on mark that was recorded
on case (1) in step 7.
case (1) inner diameter.
20. Turn adjusting knob (29) on milling machine
(17) until cutter (22) just makes contact with
GO TO NEXT PAGE
4-376
