TM 55-2840-254-23
5-14 INSPECT STARTER DRIVE ASSEMBLY
5-14
INITIAL SETUP
Applicable Configurations:
All
Tools:
Technical Inspection Tool Kit,
NSN 5180-00-323-5114
Personnel Required:
68B30 Aircraft Powerplant Inspector
References:
Task 1-118
Equipment Condition:
Off Engine Task
Materials:
None
1. Inspect starter drive assembly (1).
a. There shall be no cracks.
b. There shall be no evidence of leakage in area
of seal (2).
c. There shall be no wear deeper than 0.012
inch on splines (3).
2. Inspect gearshaft (4). There shall be no wear
deeper than 0.007 inch splines (5 and 6)
(Ref. Task 1-118).
FOLLOW-ON MAINTENANCE:
None
END OF TASK
5-86
