TM-55-4920-328-13
Table 2-5. Function of Controls and Indicators --Continued
INDEX AND
REFERENCE
FIGURE NO.
NOMENCLATURE
DESIGNATION
FUNCTION OR INDICATION
ANALYZER SUB-MODULE (Figure 1-23)-Continued
14, figure
SENSITIVITY
Part of
Used to adjust sensitivity of OIL FLOW/
1-23
Control
2A2
CONSUMPTION monitor unit (11, fig-
ure 1-23).
15, figure
K FACTOR
Part of
Used to insert K factor correction data
1-23
Preset
2A2
in the circuitry of the OIL FLOW/CON-
SUMPTION monitor unit (11, figure 1-
23).
16, figure
FUEL FLOW
Part of
Used to display fuel flow in pounds per
1-23
Monitor Unit
2A2
hour (pph).
17, figure
DISPLAY
Part of
Selects the display time interval (0.2 to
1-23
Control
2A2
5.0 seconds, or hold) for fuel flow indi-
cation displayed on the FUEL FLOW
monitor unit (16, figure 1-23).
18, figure
FUNCTION
Part of
Selects the TEST mode or RUN mode
1-23
Control
2A2
for self-check or operation, respectively,
of the FUEL FLOW monitor unit (16,
figure 1-23).
19, figure
SENSITIVITY
Part of
Used to adjust sensitivity of FUEL
1-23
Control
2A2
FLOW monitor unit circuitry.
20, figure
K FACTOR
Part of
Used to insert K factor correction data
1-23
Preset
2A2
into the circuitry of the FUEL FLOW
monitor unit (16, figure 1-23) to read
out flow in pph.
22, figure
Vibration
Part of
Displays velocity in inches per second
1-23
Meter
2A3
or peak-to-peak displacement in mils,
depending on the mode selected.
2-23
