Place probe on part in the inspection location and null. Adjust phase as required to obtain horizontal lift-
Inspect the part.
Any signal similar to the notches in the test block is cause for rejection.
ease of accessibility and user friendliness. If the probes are changed, steps 184.108.40.206 b.
(1), (2), and (3) shall be repeated each time a change is made.
220.127.116.11 Marking and Recording of Inspection Results. Mark and record as required by paragraph 1.3.
Backup Method. None required.
System Securing. If removed, the lower drag link requires installation in accordance with the applicable