SHEET METAL SHOP
POSITIONING SHOP EQUIPMENT
SAFEGUARDING BOLTS, WASHERS, AND NUTS
The following procedures and recommended sequence for moving equipment shall be observed. New positions in
which equipment will be located on expanded half of shelter are identified.
Ensure that proper bolts, washers, and nuts are available to secure equipment
when shop is to be transported. Lack of correct hardware could cause extensive
damage to equipment or shelter when shop is moved. All bolts, washers, and
nuts removed from equipment will be collected and placed in cotton mailing bag.
Cotton mailing bag is kept in Shelter BII box for safekeeping until shelter is to be
moved and equipment bolted to floor.
THROATLESS SHEAR STAND
Operating handle should only be installed when throatless shear is in use.
1. Remove four bolts (2), four lock washers (3), and four flat washers (4) from base of throatless shear stand (1).
2. Store hardware in appropriate storage location.