Section IX PREPARATION FOR STORAGE AND SHIPMENT (Continued)
1-90 INSTALLATION IN CONTAINER
5. Remove shipping brackets (12), gaskets (11), bolts
(14) and washers (13) from cloth bag in container.
Insure no loose items are in container.
Do not use standard commercial
hardware to fasten support brackets to
engine or container. Use of lower
specified, could cause serious engine
damage during shipping or handling.
6. Install brackets (12) and gaskets (11) on engine.
Secure with washers (13) and bolts (14), torque to 225
to 250 inch-pounds and lockwire (E.4).
7. Insure that inside of container is free of dirt, water, oil
or other contaminants and check mating faces of
container flanges for distortion or other unserviceable
conditions that may affect airtight sealing of flange
GO TO NEXT PAGE