TM55-2840-251-23
6-5
FUEL MANIFOLD ASSEMBLY (Continued)
6-5-1 REMOVAL
NOTE
The fuel dump valve must be removed with the inlet
adapter.
1.
Disconnect harnesses from glow plugs to give
easier access (Task 7-4-1).
2.
Index mark each manifold adapter with its position
in gas generator case as shown, with Colorbrite Pencil
(E.31).
3.
Remove lockwire and disconnect fuel delivery tube
(1) at dump valve elbow (2).
4.
Remove attachment bolts (3) and lockplates (4)
from inlet adapter (5), located at 6 o'clock position on
gas generator case and from the two adjacent manifold
adapters (6).
5.
Remove fuel manifold transfer tubes (7).
6. Remove fuel dump valve (8) and inlet adapter (5) as
an assembly. Remove and discard gasket (9).
7. Remove lockwire, back off locknut (10) and unscrew
and remove dump valve from inlet adapter.
GO TO NEXT PAGE
6-18