TM 1-1500-204-23-1
CHAPTER 5
MARKING OF AERONAUTICAL ITEMS
5-1.
General. The marking system specified in the
following paragraphs provides the means for accurately
identifying and indicating the condition of aeronautical
items.
5-2.
Marking Requirements. A single materiel
condition tag shall be used to identify each aeronautical
component, assembly, kit, or set which is assigned a
Federal Stock Number and is stocked, stored, and issued
as a single line item of supply. However, individual parts
of components, assemblies, kits, or sets which are
identified and listed as single line items of supply shall be
individually tagged when physically separated from the
component, assembly, kit, or set.
5-3.
Materiel Marking. The following are the only
materiel condition tags and labels authorized for use on
Army aeronautical items. These tags and labels are in
addition to applicable maintenance forms, records, or tags
required by DA PAM 738-751.
· Serviceable Tag-Materiel (DD Form 1574) and
Serviceable Label Materiel (DD Form 1584-1).
· Unserviceable (Repairable) Tag-Materiel (DD
Form 1577-2) and Unserviceable (Reparable)
Label-Materiel (DD Form 1577-3).
· Unserviceable (Condemned) Tag-Materiel (DD
Form 1577) and Unserviceable (Condemned)
Label-Materiel (DD Form 1577-1).
· Suspended Tag-Materiel (DD Form 1575) and
Suspended Label-Materiel (DD Form 1575-1).
· Test/Modification Tag-Materiel (DD Form 1576)
and Test/Modification Label Materiel (DD Form
1576-1).
5-4.
Method of Accomplishing Entries. When
initiating materiel condition tags or labels, entries will be
made in the appropriate blocks as prescribed by DA PAM
738-751.
5-1/(5-2 blank)
