NAVAIR 01-1A-505-2
003 02
TO 00-25-255-1
Page 4
TM 1-1500-323-24-2
Support Equipment Required (Cont.)
Support Equipment Required
Part No./
Nomenclature
Part No./
Nomenclature
Type Designation
Type Designation
DRK105-12
Unwired Removal Tool
M81969/14-05
Insertion/Removal
DRK105-20
Unwired Removal Tool
Tool, Plastic
HT-900B (or equivalent)
Heat Gun
M81969/14-06
Insertion/Removal
L-5217
Gripper Filter Line
Tool, Plastic
L-9038
Frame Filter Line
M81969/30
Tool, Extraction,
M22520/l0-01
Crimp Tool Frame
Unwired contacts
M22520/l0-07
Die Set
11-120134
Tool Kit Expander
M22520/l-01
Crimp Tool Frame
1716P-1
Crimp Tool
M22520/104
Turret
45-1924
Stripper Filter Line
M22520/2-01
Crimp Tool Frame
45-1924-1
Blade Set Filter Line
M22520/2-07
Positioner
Materials Required
M22520/2-09
Positioner
M22520/2-10
Positioner
Specification/
Nomenclature
M22520/2-31
Positioner
Part No.
M22520/2-34
Positioner
M22520/2-35
Positioner
None
M22520/31-01
Crimp Tool Frame
M22520/31-02
Positioner
1. INTRODUCTION.
M22520/3-1
Gage
M22520/3-3
Gage
2. This work package (WP) covers four series of
M22520/3-15
Gage
miniature, high density, circular, environment resistant
M22520/4-01
Crimp Tool Frame
electrical connectors. Depending upon series they are
M22520/4-02
Positioner
coupled either by bayonet, breech, or threads. The contacts
M22520/5-01
Crimp Tool Frame
used are either removable crimp, or fixed hermetic solder,
M22520/5-05
Die Set
and are capable of continuous operation within a
M22520/5-200
Die Set
temperature range of -65C to 200C.
M22520/7-01
Crimp Tool Frame
M22520/7-04
Positioner
NOTE
M22520/7-05
Positioner
M22520/7-06
Positioner
As all NAVAIR connector and accessory
M22520/7-07
Positioner
documents are transitioned to non-government
M22520/7-08
Positioner
standards, (the Society of Automotive
M81969/8-01
Insertion Tool, Metal
Engineers (SAE) will become the preparing
M81969/8-02
Removal Tool, Metal
activity and the Navy will adopt the
M81969/8-03
Insertion Tool, Metal
documents), the drawing number prefix will
M81969/8-04
Removal Tool, Metal
change from MS to AS. The main part number
M81969/8-05
Insertion Tool, Metal
designation remains the same, with the "M"
M81969/8-06
Removal Tool, Metal
prefix, such as M81511/17-08. At times the
M81969/8-07
Insertion Tool, Metal
entire item may be superseded by another.
M81969/8-08
Removal Tool, Metal
There are many cases where documents have
M81969/8-09
Insertion Tool, Metal
been cancelled without replacement, each case
M81969/8-10
Removal Tool, Metal
was reviewed and some information has been
M81969/14-01
Insertion/Removal
retained in this volume "for reference use only".
Tool, Plastic
M81969/14-02
Insertion/Removal
3. DESCRIPTION. This connector displays the
Tool, Plastic
following characteristics:
M81969/14-03
Insertion/Removal
Tool, Plastic
a. All series employ rear release removable
M81969/14-04
Insertion/Removal
Tool, Plastic
pin and socket contacts with crimp terminations.
