NAVAIR 01-1A-505-3
TO 1-1A-14-3
TM 1-1500-323-24-3
007 03
1 September 2011
Page 2
qualified vendor with suitable product meeting form,
9. Cable Clamps. A cable clamp is a support or
fit and function, may be used.
clamping device which requires use of an
intermediate component for attachment to back of
11. JUNCTION SHELLS. Junction shells are
connector (Figure 4).
attached to the rear of the connector to prevent wires
from being pulled out (Figure 5). Vendor parts are
10. Strain Reliefs. A strain relief is a support or
shown, however any qualified vendor with suitable
clamping device which attaches directly to connector
product meeting form, fit and function, may be used.
(Figure 4). Vendor parts are shown, however any
Size 12
Size 20
Size 16
Size 22
Contact
Part No.
Color
Size
12
MS27488-12
Yellow
16
MS27488-16
Blue
20
MS27488-20
Red
22
MS27488-22
Black
Figure 1. Sealing Plugs
Figure 2. Typical Dust Caps