NAVAIR 01-1A-505-3
TO 1-1A-14-3
TM 1-1500-323-24-3
009 03
1 September 2011
Page 2
7. BACKSHELL REMOVAL. Backshells are
8. BACKSHELL INSTALLATION. Upon
used to protect and add strength to connectors. When
completion of maintenance or modification the
modification or repair to connector is necessary, the
backshell must be replaced. Install shell in
shell must be removed. Remove backshell in
accordance with following procedure:
accordance with following procedure:
a.
Position backshell on cable and connector.
a.
Loosen cable clamp.
b. Tighten screw on each side of connector
b. Loosen screw on each side of connector
securing backshell to connector.
securing shell to connector.
c.
Tighten cable clamp.
c.
Remove backshell.
Bushing
Bushing
End Bell
Bushing Clamp
Part Number
Bushing Clamp
Machine Screw
Straight Backshell
Part Number M21617/29-S
Bushing Clamp
Bushing Clamp
Machine Screw
End Bell
Part Number
Bushing
Bushing
90 Backshell
Part Number M21617/29-A
Figure 2. M21617/29 Backshell
