NAVAIR 01-1A-505-3
TO 1-1A-14-3
TM 1-1500-323-24-3
014 02
1 September 2011
Page 15
23.
INSERT REMOVAL. Remove insert as follows:
a. Align insert removal tool (Figure 16) to shell insert retention clips (Figure 17).
b. Slide insert removal tool into shell till retention clips are released (Figure 18).
c. Squeeze insert removal tool to gain a firm grip on the insert (Figure 19).
d. Pull straight out till insert is clear of shell (Figure 20).
Straight Removal Tool
Right Angle (90) Removal Tool
Figure 16. EPX Insert Removal Tools
Figure 17. Aligning EPX Insert Removal Tool
Figure 19. Applying pressure to Insert
Figure 20. Insert Removed From Shell
Figure 18. Removal Tool Inserted Into Shell