TM 1-1510-253-CL
* BEFORE TAKEOFF
1. FLAPS -- SET 1/4
2. Trims -- SET for TAKEOFF
3. Pressurization -- SET
4. Cabin -- CHECK
5. Galley & Stores -- Check Secured
6. FRESH AIR FAN -- NORMAL or OFF
7. Flight Controls -- Free & Correct
8. Engine & System Indications -- CHECK
9. DEP Briefing / TOLD Data -- Review and
SET
10. COMMs & NAVs -- SET As Required (SAFFR
- Source, Altitude, Format, FD & Runway)
* LINEUP CHECK
1. Runway & Final Approach -- Clear
2. IGNITION & ICE PROTECTION -- SET As
Required
3. EXTERIOR LIGHTS -- All ON
4. Transponder / Radar / TCAS -- SET As
Required
5. BLEED AIR Switches -- SET As Required
NOTE
For CAWI takeoffs, set approximately 40%
torque before selecting continuous (CONT)
with WATER INJECTION switch.
AFTER TAKEOFF
1. Landing Gear -- UP
2. FLAPS (V2 + 5 KIAS & 500' AGL Minimum)
-- UP
3. WATER INJECTION Switch -- OFF
4. BLEED AIR Switches -- SET As Required
5. Climb Power -- SET
O 6. CMWS SAFE/ARM switch -- ARM
N-10