TM 1-1510-253-CL
BEFORE LANDING
1. PROP SYNCH -- SET TAKEOFF &
LANDING
3. FLAPS -- SET As Required
4. LANDING GEAR -- DOWN & Confirm
5. NOSE GEAR STEERING -- ARMED &
CHECK
6. Landing & Taxi Lights -- ON
LANDING
1. LANDING GEAR -- Recheck DOWN
2. FLAPS -- CHECK Final Setting
3. YAW DAMPER -- Confirm OFF
O 4. CMWS SAFE/ARM switch -- SAFE
GO AROUND
1. WATER INJECTION Switch -- SET As
Required
2. POWER -- SET As Required
3. FLAPS -- SET 1/4
4. LANDING GEAR -- UP
5. FLAPS (VREF + 5 KIAS & 500' AGL Minimum)
-- UP
6. Airspeed -- VYSE Minimum
7. WATER INJECTION Switch -- OFF
8. EXTERIOR LIGHTS -- SET As Required
O 9. CMWS SAFE/ARM switch -- ARM as
required
AFTER LANDING
2. FLAPS -- SET UP
3. IGNITION & ICE PROTECTION -- SET As
Required
4. EXTERIOR LIGHTS -- SET As Required
5. PITCH TRIM -- SET In Green Arc
N-12
