TM 1-1510-253-CL
NOTE
If restoration of bus is required, pull all
circuit breakers on affected bus, turn bus
tie switch on, reset circuit breakers one
at a time until faulty circuit is found. Pull
circuit breaker for malfunctioning circuit
and do not reset.
TOTAL ELECTRICAL FAILURE
1. ENTRANCE LIGHT Switch -- SET As
Required
NOTE
Pilot's overhead and entrance floodlights
are battery powered when entrance light
is in ON position
2. ESIS PWR Switch -- Verify ARMED /
STBY PWR Light ON
3. ESIS (Airspeed, Attitude, Altitude) --
Verify Powered & Valid
4. AVIONICS AUX PWR Switches -- ON
5. Both BATTERY Switches and GEN
Switches -- OFF
6. BATTERY Switches (Individually) --
RESET / ON
7. GENERATOR Switches (Individually) --
RESET / ON
GENERATOR FAILURE
(L GEN FAIL or R GEN FAIL Light
Illuminated)
NOTE
Some aircraft Warning lights may have
"GENERATOR" instead of "GEN".
1. GENERATOR (Affected Side) -- OFF
/ RESET
2. Voltmeter -- Check Normal
E-28