TM 1-1520-264-23
6.42.4 Backup Method. None required.
6.42.5 System Securing. Clean the exterior surfaces of all ferrous hydraulic components (servocylinders, actuators,
reservoirs, etc.) thoroughly to remove all residual magnetic particle media. Refer to Post Cleaning and Restoration of
Part or Area After NDI, paragraph 1.4.16. Any part, if removed, requires installation in accordance with the applicable
technical manuals listed in Table 1-1.
Figure 6-42. Exterior Surfaces of All Ferrous Hydraulic Components
(Servocylinders, Actuators, Reservoirs, etc.)
6-90
