0012 00
TM 1-4920-435-13&P
BAND SAW
1. Remove four screw plugs from floor insert at transport location (see WP 0002 00, Figure 2).
2. Store plugs in appropriate storage location.
3. Position band saw by sliding along floor to transport location.
4. Obtain four bolts (2), four lock washers (3), and four flat washers (4) from appropriate storage location.
5. Align holes in band saw brackets (1) with floor inserts and install bolts (2), lock washers (3), and flat washers
(4).
6. Torque bolts 160-190 in. lbs.