TM 1-4920-435-13&P
0025 00
SHEET METAL SHOP
ANVIL/THROATLESS SHEAR STAND
INITIAL SETUP
Tools And Special Tools:
References:
Tool Kit, Power Plant
MIL-STD-2219
Tool Kit, Electrical Repairer
Equipment Conditions:
Torque Wrench 0-600 in. lbs. (5120-01-530-2311)
Functional
Materials/Parts:
Anvil/Throatless Shear Stand Assembly
Cap Screw Hexagon Head
Personnel Required: (1)
44E, Machinist
CMF 15 Series
NOTE
During installation of components the same hardware should be used so as to
maintain the original integrity of the shop sets.
INSPECT
When anvil/throatless shear stand is in mounted transport location, inspect bolts attaching anvil/throatless shear
stand to floor for looseness. If there are any damaged bolts or threaded inserts, replace as instructed in WP 0026
00. Visually inspect anvil/throatless shear stand structure for cracked or
broken welds. If
stand is
damaged it
must
be repaired or replaced. Damaged welds may be repaired by welding cracks and broken areas.
0025 00-4