TM 1-4920-435-13&P
0025 00
SHEET METAL SHOP
STAKE SUPPORT TABLE
INITIAL SETUP
Tools And Special Tools:
References:
Tool Kit, Power Plant
MIL-STD-2219
Tool Kit, Electrical Repairer
Equipment Conditions:
Torque Wrench 0-600 in. lbs. (5120-01-530-2311)
Functional
Multimeter (6625-01-265-6000)
Materials/Parts:
Stake Support Table Assembly
Bolt (WP 0033 00, Figure 1, Item 3)
Lock Washer (WP 0033 00, Figure 1, Item 4)
Flat Washer (WP 0033 00, Figure 1, Item 5)
Bolt (WP 0033 00, Figure 1, Item 6)
Hexagon Head Cap Screw
Nut (WP 0033 00, Figure 1, Item 8)
Nut (WP 0033 00, Figure 1, Item 9)
Countersunk screws
Personnel Required: (1)
44E, Machinist
CMF 15 Series
NOTE
During installation of components the same hardware should be used so as to
maintain the original integrity of the shop sets.
INSPECT
When table is in mounted transport location, inspect bolts attaching stake support table to floor for looseness. If
there are any damaged bolts or threaded inserts, replace as instructed in WP 0026 00. Visually inspect table
structure for cracked or broken welds. If table is damaged it must be repaired or replaced. Damaged welds may
be repaired by welding cracks and broken areas.
0025 00-7
