TM 1-4920-435-13&P
0025 00
REMOVE
NOTE
After shelter has been expanded and equipment moved to proper location, there
will not be any bolts mounting stake support table to floor.
Remove stake plate from stake support table by removing four countersunk screws, four lock washers, eight flat
washers, and four nuts.
REPAIR
1. Prepare and weld cracked or broken welds in accordance with MIL-STD-2219. Welding repair must not
interfere with form, fit or function of stand.
2. If stake support table is damaged beyond repair, replace it with a new one. A new stake support table can be
manufactured from drawing found in WP 0027 00.
0025 00-8
