TM 1-6625-476-30
2-38
2-14. TADS NSA INSTALLATION INTO SHIPPING AND STORAGE CONTAINER. (CONT)
f. Grasping handles (1, figure 2-26) of handling fixture and sides of base assembly (2), reposition
TADS NSA on workbench with NSA resting on base assembly.
g. Remove handling fixture as follows:
(1) Hold fixture (1, figure 2-27) in place and open locking lever (2) by lifting it up.
(2) Loosen thumb locknuts (3).
(3) Release clamp pad (4) by pressing down and holding clamp arm (5) near locking lever.
(4) Slide clamp arm toward locking lever as far as it will go.
(5) Carefully remove handling fixture from TADS NSA casting (6).
Figure 2-26. TADS NSA Atop Workbench with Base Assembly Installed
