TM 10-4930-351-14
0008 00
REPLACE PUMP-ENGINE MODULE - Continued
4.
Remove engine air cleaner and install dust cap IAW WP 0007 00.
5.
Disconnect cables W201 (5) and W202 (6) from engine module (1). Stow cables in accessory module (7).
6.
Close unisex coupling valves on suction hoses (8) and disconnect the suction hoses (8) from the pump inlet manifold (3).
7.
Disconnect the pump inlet manifold (3) from the fuel transfer pump.
8.
Drain pump inlet manifold (3) of fuel.
9.
Close unisex coupling valves on 3" x 6' discharge hose (9) and disconnect the 3" x 6' discharge hose (9) from the
emergency fuel shutoff valve (4).
10. Remove pump-engine module (2) and position replacement pump-engine module for connection to system IAW
11. Install inlet manifold (3), suction hoses (8), and discharge hose (9) on pump-engine module (2).
12. Connect cables W201 (5) and W202 (6) to engine module (1).
13. Install air cleaner IAW WP 0007 00 and acoustic cover (if provided) IAW WP 0007 00 on engine module.
14. Open all inlet and outlet unisex coupling valves.
15. Start system IAW WP 0007 00.
REPLACE ACCESSORY MODULE
WARNING
Serious injury could occur if heavy equipment is moved/lifted without sufficient personnel to
do the job. Always use four personnel to move or relocate the accessory module. Use proper
physical lifting procedures or use a suitable lifting device or dolly. Wear safety shoes, gloves,
and other suitable protective clothing.
1.
Shut down system IAW WP 0007 00.
2.
Disconnect cables W201 (5) and W202 (6) from engine module (1). Stow cables in accessory module (7).
3.
Remove air cleaner from engine and install dust cap on intake manifold IAW WP 0007 00.
4.
Remove accessory module (7) and position replacement accessory module for connection to system.
5.
Connect cables W201 (5) and W202 (6) to engine module (1).
6
Install air cleaner on engine IAW WP 0007 00.
7.
Start system IAW WP 0007 00.
0008 00-2
