TM 10-4930-351-14
0008 00
REPLACE LIQUID FUEL FILTER-SEPARATOR
WARNING
Serious injury could occur if heavy equipment is moved/lifted without sufficient personnel to do
the job. Always use four personnel to move or relocate the liquid fuel filter-separator. Use
proper physical lifting procedures or use a suitable lifting device or dolly. Wear safety shoes,
gloves, and other suitable protective clothing.
1.
Shut down system IAW WP 0007 00.
2.
Defuel liquid fuel filter-separator (10) IAW WP 0007 00.
3.
Disconnect 6' hose (9) from the inlet port.
4.
Disconnect recirculation manifold (11) from the outlet port.
5.
Remove liquid fuel filter-separator (10) and position replacement liquid fuel filter-separator for connection to system.
6.
Install recirculation manifold (11) on outlet port.
7.
Connect 6' hose (9) to the inlet port.
8.
Open manual vent valve while liquid fuel filter-separator (10) is flooding. Close vent at first appearance of fuel.
9.
Start system IAW WP 0007 00.
REPLACE ANY HOSE OR FITTING
1.
Close valves to isolate hose or fitting.
2.
Remove hose or fitting from system and drain into a suitable container.
3.
Install replacement hose or fitting and open valves.
4.
Continue mission.
0008 00-3
