TM 10-4930-351-14
0063 00
9
10
11
5
12
6
1
3
2
R1
4
7
8
INSTALLATION
1.
Install potentiometer R1 (4) on control panel (3) with nut (11) and lock washer (12).
2.
Install knob (10) on potentiometer shaft and tighten two set screws (9).
3.
Solder leads (8) to potentiometer terminals as tagged. Remove tags.
4.
Install tiedown straps on wiring harness as required.
5.
Install the "L" bracket (7) on the control panel (3) with three screws (5) and flat washers (6).
6.
Install control panel (3) in control box with twenty-four screws (1) and flat washers (2).
END OF WORK PACKAGE
0063 00-2
