TM 10-4930-351-14
UNIT MAINTENANCE
ADVANCED AVIATION FORWARD AREA REFUELING SYSTEM MODEL M100A1
REPLACE CAPACITOR C1
INITIAL SET-UP:
Tools:
Materials/Parts Required:
Screwdriver, Cross Tip, #2
Wrench Socket, 1/4", 1/4" square drive
Handle, Socket Wrench (Nutdriver Type)
REMOVAL
1.
Remove the twenty-four screws (1) and flat washers (2) that secure the control panel (3) to the control box.
2.
Lift the control panel (3) from the control box and set on edge convenient to capacitor C1 (4).
3.
Remove screw (5), washers (6), and nut (7) attaching capacitor C1 (4) to the "L" bracket (8). Retain mounting hardware.
4.
Remove clamp (9) from capacitor C1 (4).
5.
Tag and remove leads (10) from capacitor C1 (4).
INSTALLATION
1.
Install leads on capacitor C1 (4) as tagged. Remove tags.
2.
Position clamp (9) around center of capacitor C1 (4).
3.
Attach capacitor C1 (4) to "L" bracket (8) using screw (5), washers (6) and nut (7).
4.
Install control panel (3) in control box using twenty-four screws (1) and flat washers (2).
0066 00-1