TM 10-4930-351-14
0098 00
DISASSEMBLY - Continued
CAUTION
Avoid scratching or gouging beveled edge of seal retainer under seal wire, or any sealing
surface. Gouges or burrs may cause the valve to malfunction.
12. Use pick (or scribe) to remove seal retainer (25). Insert pick between inner edge of retainer and seal, work down to
bottom of retainer, rotate under retainer and lift to unseat and remove retainer. Repeat this process all around inner edge
of the retainer until it is free.
13. Remove and discard seal (26).
14. Remove the bumper (27) by hand.
15. Remove screws (28) and lug (29).
16. Remove screws (30) and lug (31).
18
23
1
19
2
20
28
INLET
22
21
32
33
13
31
10
27
24
25
14
26
16
15
17
12
30
29
8
1
3
11
9
7
4
6
5
0098 00-2