TM 10-4930-351-14
DIRECT SUPPORT MAINTENANCE
ADVANCED AVIATION FORWARD AREA REFUELING SYSTEM MODEL M100A1
REPAIR FUEL DRUM ASSEMBLY
INITIAL SET-UP:
Equipment Condition:
Tools:
Tool Kit, General Mechanic Automotive
Fuel Drum Drained
(WP 0113 00, Item 1)
Torque Wrench
Personnel:
(WP 0113 00, Item 2)
Two
Materials/Parts Required:
Compound, Anti-seize
(WP 0116 00, Item 5)
DISASSEMBLY
CAUTION
Mark the drum, bearing plate, swivel plate and closure ring to facilitate and assure
same alignment when assembled. This action will prevent twisting the wire ropes.
NOTE
Both ends of the drum contain identical parts.
1.
Remove dust cap (1) and adapter assembly (2) from both ends of drum.
2.
Remove cotter pin (3), screw-pin (4) and shackle (5).
3.
Repeat step (2) to remove the remaining shackles (5).
4.
Remove 10 capscrews (6) from bearing plate (7) and remove bearing plate (7) from fuel drum.
5.
Repeat step (4) to remove bearing plate (7) from other end of drum.
6.
Remove 21 capscrews (8) from closure ring (9) and remove closure ring (9) along with the swivel plate (10).
7.
Perform step (6) to remove closure ring (9) and swivel plate (10) from other end of the drum.
8.
Remove cable assembly (11) from inside of drum body (12).
9.
Remove closure plate (13) from inside of drum body (12).
0103 00-1
