TM 10-4930-351-14
0109 00
INSTALL CASING (Refer to Figure 36.)
INITIAL SET-UP:
Tools:
Materials/Parts Required
Tool Kit, General Mechanics
None
Equipment Condition:
Fuel injection pump adjusted
or
All maintenance complete
1.
Thread fuel solenoid wire cable (1) through the black start control knob (2), position cylinder casing (3) on engine, and
install and tighten the two socket head cap screws (4) and washers (5) that secure the casing to the cylinder heads (6).
2.
Install cable clamp (7) on fuel solenoid cable.
6
1
7
3
5
4
2
Figure 36. Casing Installation
END OF WORK PACKAGE
0109 00-51/52 blank