TM 10-4930-351-14
0109 00
NOTE
Copper washers are used under the two socket head cap screws at the lower side of the fuel control cover.
12. Attach new gasket (7) to control rod cover (4) if previous gasket was discarded. Position control rod cover (4) on the
crankcase. Install five socket head cap screws (1) and washers (2 and 3) attaching the control rod cover (4) to the
crankcase.
13. Install nut (5) and washer (6) attaching the control rod cover (4) to the crankcase.
14. Install valve covers.
16
12
13
11
15
14
8
10
9
6
5
2
1
7
4
3
1
2
5
1
3
1
Figure 34. Fuel Injection Pump Timing Adjustment
0109 00-48
