TM55-1500-345-23
face to apply the symbol, will be marked on the
h. Internal components located in or adja-
surface of the component that would not normally
cent to cargo compartment areas shall be
be visable from outside the aircraft. With either
finished to match internal airframe color.
chemical agent resistant coating polyurethane
(CARC-P) or chemical agent resistant coating
epoxy (CARC-E) using 1/4 inch lettering.
1-10. EXCEPTIONS TO TACTICAL AIR-
i. All aircraft that have been painted or re-
CRAFT PAINTING.
painted with MIL-C-46168 should be marked with
the polyurethane paint symbol as indicated in
Medical air ambulances will be painted in
a.
46168 designation shall be as shown. The paint
accordance with the instructions in Chapter 5.
scheme used shall be shown in the manner and
location specified in paragraph 7-40. The polyure-
thane paint symbol shall be to the left of the air-
TDA helicopters may be painted to the
b.
frame. Aircraft components with insufficient sur-
tactical paint scheme but retain high visibility/-
conspicuity markings described in Chapter 5. Air-
craft in this category that are used for training
purposes at Army aviation schools and other
facilities may be banded with fluorescent paint or
tape to ensure better daylight inflight visibility.
Refer to Chapter 9.
Aircraft designated for a specific mission
c.
or assigned to certain geographic locations may
be painted variations to the tactical paint of
ing these non-tactical paint schemes.
MIL-C-46168 Identifier Symbol
1-3/( 1-4 blank)
