TM 55-1500-345-23
(2)
UH-1D/H Helicopters. Apply stencil to
interior surface above cargo door glass at station
102.0 on both sides.
(3)
CH-47 Helicopters. Apply stencil each
side of the interior surface of aircraft and locate
over the back of troop seats above each window (4
locations on each side). (See paragraph d for stencil
information.)
(4)
CH-54 Helicopters and Universal
Military Pod. Apply stencil on each side of the
interior surface of the pod. Locate above the back of
troop seats (4 locations on each side). Space so the
lettering is visible to all troop positions.
(5)
OH-6 Helicopters. Apply stencil to the
rear of forward bulkhead on each side. Locate so
lettering is readily visible to each passenger.
(6)
OH-58 Helicopters. Apply stencil to
blanket assembly at approximately FS 97.50 and
WL 67.
(7)
C-12 and RC-12 Aircraft.
(a) Attach label (P/N 7690-EG-000-2)
to the exterior surface centered on the passenger
door that is on the left side of the aircraft.
(8)
AH-64 aircraft. Apply stencil to right
side lower area of both crewstations.
(9)
AH-1 aircraft. Apply stencil to right
inside lower area of both crewstations.
(10)
UH-60 Helicopter.
(a) Apply stencil to the interior surface
of cargo door centered on the center post between
the windows (both sides).
(b) Apply stencil to interior surface at
station 300, water line 244 (both sides).
d. The adhesive backed labels are for use on
aircraft hard surfaces only. For aircraft requiring
labels over fabric-lined or acoustical-blanketed
interior areas, cut or procure a stencil locally. For
size and wording of stencil, see figure 7-2.
change 9
