TM 55-1500-345-23
CODE
WORDING
NO.
DIRECTIONS
1
Authorized placement of unit insignia is on
nose compartment access panel.
Left side of helicopter with arrow pointing aft.
2
HAND FIRE
Arrow should not extend beyond word
EXTINGUISHER
"EXTINGUISHER." 1/2-in. MIL-C-46168
INSIDE
aircraft black No. 37038 letters and arrow. See
code 48 for alternate location.
3
Under cockpit and cabin door handles. Both
sides of helicopter. Arrow is 1-1/2 in. Long
with 1/2-in. shaft and 1/2-in. arrow head.
Arrow should be on side of word to show
travel of handle. 1/2-in. black letters.
4
Locate under word "TURN," below both crew
PULL
door handles, 1-in. black letters. See code No,
3.
5
Both sides of cabin between doors. Midway
between cockpit and cabin door handles. 1-1/2
in. arrow pointing toward handles, 1-in. black
letters
EXIT RELEASE
TURN
6
Locate below "TURN," 1-in. black letters,
arrows same size as those for code No. 3.
SLIDE
7
On each side and top of fiberglass duct 1/2-
NO STEP
in. black letters.
8
DELETE
9
UH-1C and UH-1M. Locate below fuel filler
CAP.227.6 U.S. GALS
cap, 1/2-in. black letters. See Detail A.
USE JP-4 MIL-T-5624
IF NOT AVAILABLE REFER
TO TB55-9150-200-24 FOR
ALTERNATE FUEL
Right side engine air scoop,1l/2-in. black let-
10
HAND HOLD
ters.
Figure 9-30. Exterior Markings, UH1C and UH-1M (Sheet 6 of 17)
9-139
Change 5
