TM 55-2840-231-23
2-2.
Compressor - Removal.
INITIAL SETUP
Applicable Configuration
Au
Special Tools
Turnover Stand, Tool No. 6795579
References
Para 1-32
TURNOVER
STAND/
Install the engine in the turnover stand,
Rotate the engine to a
tool no. 6795579. Refer to para 1-32.
vertical position in the
stand with the compressor
up.
ENGINE/
1. Oil Supply Tube
and Scavenge Tube
(13 and 27)
2. Discharge Pressure
Sensing Tube (35)
3. Lockwire on
Jam Nut (36)
4. Jam Nut (36)
6. Pressure Probe
Elbow (34)
Remove compressor oil
supply tube (13 ) and
scavenge tube (27) between
the compressor front support
and the gearbox.
Remove discharge pressure
sensing tube (35) by
removing attaching clamp
(39), bolt (40) and nut
(38), and removing tube
between the diffuser
scroll and the tee at the
power turbine governor.
Remove.
Loosen.
Remove from diffuser
scroll.
2-2