TM 55-2840-231-23
6-8. GAS PRODUCER FUEL CONTROL - REMOVAL
INITIAL SETUP
Applicable Configuration
All
ENGINE/
1. Fuel Control Lever
2. Fuel Tube (5 and 6)
3. Fuel tube (9)
4. Air Tube (1)
5. Air Tube (2)
6. Air Tube (3)
6-10
Change 8
NOTE
Before replacing the fuel control to
correct an engine malfunction, insure
that the pneumatic tubes and fittings
are not leaking and that the double
check valve is functioning properly.
A malfunction which appears to be a
fuel control malfunction may be
caused by erroneous pressures.
Remove the self-locking nut
and remove the lever from
the fuel control.
It will not be necessary to disturb the
Remove tubes between
clamping arrangement between the tubes.
fuel pump (7) and control
(8).
Remove tube between the
control and fireshield.
Remove tube between the
control and governor.
Remove tube between the
control and governor.
Remove tube between the
control and accumulator.