TM 55-2840-231-23
6-11. Gas Producer Fuel Control - Installation - Continued
FUEL CONTROL/ -
Continued
3. Heating Tube
4. Air Tube (5)
If the engine has a fuel
control heating kit in-
stalled, install heating
tube on the two studs at
the bottom of the fuel
control mounting pad.
Secure the control with
three washers and
self-locking nuts.
Tighten nuts to
70-85 in. lb (0.8 -1.0
kg/m).
Install air tube between
fuel control and governor.
Tighten coupling nuts to
80-120 in. lb (0.9 -1.4
kg/m).
Change 6
6-19