6-11. Gas Producer Fuel Control - Installation. Continued
FUEL CONTROL/
Continued
6. Air Tube (2)
Install air tube (2) be
tween control and
governor. Tighten
coupling nuts to 80-120
in. lb (O.9- 1.4 kg/ m).
Tighten Jam nut on tube
fitting to 55-80 in. lb
(0.6 -0.9 kg/m).
7. Fuel Tube (4)
8. Air Tube (l)
9. Fuel Tubes (6 and
7)
10. Lever
(Refer to paragraph 6-7.)
NOTE
Overtorquing nut causes binding of
the lever shaft.
Install fuel tube (4) be-
tween control and fire-
shield. Tighten coupling
nuts to 80-120 in. lb
(0.9 -1.4 kg/m ).
Install air tube (1) be-
tween control and
governor.
Tighten
coupling nuts to 80-120
in. lb (0.9 -1.4 kg/m).
Tighten jam nut to 55-
80 in. lb (0.6 -0.9 kg/
m).
Install fuel tubes (6 and
7) between fuel pump
and control. Tighten
coupling nuts to 150-200
in. lb (1.7 -2.3 kg/m).
Assemble lever on con-
trol and secure with a
self-locking nut. Posi-
tion lever in accordance
with rigging instructions
contained in applicable
aircraft manual.
Change 6
6-21
