TM 55-2840-231-23
6-11. Gas Producer Fuel Control - Installation - Continued
ENGINE/
11. Pneumatic Tubes
12. Fuel System
ENGINE/
(Refer to paragraph 6-3. )
(Refer to paragraph 6-2.
Check pneumatic tubes
for leaks.
Bleed the fuel system.
Test the engine as
outlined in paragraphs
1-63 thru 1-71 and make
the following adjustments
if required.
a. Idle speed. (Refer to
paragraph 6-5. )
b. Start derichment.
(Refer to paragraph 6-12. )
c. Start acceleration
(AVIM) (paragraph
6-12.1)
d. Max speed stop
(paragraph 6-14. )
Do not adjust minimum stop
screw, it is a factory adjustment.
Make appropriate entry
relative to fuel control
replacement in the engine
log.
6-12. Gas Producer Fuel Control - Start Derichment Adjustment
INITIAL SETUP
Applicable Configuration
Consumable Materials
All
Lockwire (item 7, Appendix D)
AIRFRAME/
1. Fuel Control
Do not disturb the pointer-to-
shaft sealed wire at any time.
This is an overhaul function only.
6-22
Change 11
