TM 55-2840-231-23
6-17. Fuel Pump and Filter Assembly - Preparation For Storage and Shipment - Continued
Oil (item 4, Appendix D)
b. Pump lubricating oil
into fuel inlet port
until fuel-free oil flows
from the outlet port.
Drain excess oil from
fuel pump.
NOTE
If the engine fuel system was pre-
served in accordance with paragraph
1-36, step b maybe omitted.
c. Install shipping plugs
in all ports to prevent
entry of foreign material.
Corrosion Preventive Compound (item 11,
d. Coat external bare
Appendix D).
metal surfaces including
the splines with corro-
sion preventive com-
pound.
e. Attach a tag to the
fuel pump stating: FUEL
PUMP PRESERVED
WITH LUBRICATING
OIL, MIL-L-6081,
GRADE 1010.
f. Attach a properly filled
out DD Form 1577-2
(Unserviceable-Reparable
tag). Refer to paragraph
1-39, for additional
information concerning
tags.
g. Prepare DA Form 2410
(Component Removal and
Repair/Overhaul Record)
according to TM 38-750
and place in a greaseproof
envelope. (Refer to
paragraph 1-39.)
6 - 4
0