TM55-2840-251-23
2-1 AIR INLET SCREEN (Continued)
2-1-1 REMOVAL
CAUTION
When air inlet screen is removed, keep
intake area clear of all foreign objects which
could be ingested by engine and cause
serious internal damage. If object is
dropped inside ducting, cease all removal or
installation
procedures
until
object
is
located and removed.
1. Remove three nuts (1), four washers (2), three bolts (3),
bracket (6) and two loop clamps (5), from flanges.
2. Carefully part screen (4) at flanges and remove from
engine.
GO TO NEXT PAGE
2-4
