TM55-2840-251-23
4-2 POWER TURBINE STATOR HOUSING (AVIM) (Continued)
4-2-1 REMOVAL
1. Remove lockwire and bolts
(1).
NOTE
Index containment ring(s)
(2) to exhaust duct flange
(6) for proper reassembly.
2. If fitted, carefully work
containment ring(s) (2) over ITT
wiring harness P/N's 3012074,
3019383 or 3028289.
3. Remove bolts or pins (3), as
fitted, then detach ring halves
(4) and stator housing (5) from
exhaust duct flange (6).
4-2-2 INSPECTION
If anti-rotation lugs are
worn below 0.195 inch in width,
return housing to Depot
Maintenance for repair.
4-2-3 INSTALLATION
1. Align bolt holes and install
stator housing (5) on exhaust
duct flange (6).
2. Install ring halves (4).
3. Install bolts (3) at
1 o'clock and 7 o'clock
positions, or install pins (3) at
4 o'clock and 10 o'clock
positions as appropriate.
GO TO NEXT PAGE
4-12
