TM55-2840-251-23
4-1 POWER SECTION (AVIM) (Continued)
4-1-2 INSTALLATION (Cont)
16. Connect power turbine
governor sensing tube (5).
Torque tube nuts (4) to 90 to
100 inch-pounds and lockwire
(E.5).
17. Install bolt (9) through two
loop clamps (10) on power turbine
governor (6), sensing tube (5) and
reversing push-pull cable (11).
Fit nut (8) and torque to 36 to
40 inch-pounds.
FOLLOW ON MAINTENANCE:
Oil System Servicing
(Chapter 1, Section VIII)
Engine Testing
(Chapter 1, Section X)
END OF TASK
4-9/(4-10 blank)
