TM55-2840-251-23
5-3 ACCESSORY GEARBOX (AVIM) (Continued)
5-3-2 REPAIR (Cont)
6. Replace defective carbon seal as follows: (Cont)
m. Using Drift (T.7) install seal carrier (10)
assembly into accessory gearbox diaphragm (1).
n. Install bearing (9), keywashers (8) and bolts
(7). Torque bolts to 32 to 36 inch-pounds and secure
with keywashers.
o. Install packings (13).
p. Install gearshaft assembly (6).
q. Install rear housing (5), screws (4), washers (3)
and nuts (2). Torque nuts to 36 to 40 inch-pounds.
NOTE
For position of screws see locator
diagram.
GO TO NEXT PAGE
5-17
