TM55-2840-251-23
5-3 ACCESSORY GEARBOX (AVIM) (Continued)
5-3-1 REMOVAL (Cont)
14. Install Holder (T.75) through center-boss and into
rear end of input gearshaft. Tighten nut on puller, until
all end play is removed. This prevents unnecessary
loading of accessory gearbox roller bearings during
gearbox removal.
15. Remove bolts (23) and (24).
16. Remove nuts (25) and bolts (26).
17. Swing scavenge tube (27) clear. Remove packings
(28).
18. Remove transfer tube (29), using Puller (T.27).
19. Remove packings (30).
GO TO NEXT PAGE
5-12.1/(5-12.2 blank)
