TM55-2840-251-23
5-3 ACCESSORY GEARBOX (AVIM) (Continued)
5-3-3 INSTALLATION (Cont)
27. Install assembly (18), plate (17), nuts (15), using
Wrench (T.55) and bolts (16). Torque nuts and bolts to
32 to 36 inch-pounds. Lockwire (E.5) bolts.
28. Connect propeller reversing gear with pin (14),
washer (13) and cotterpin (12).
29. Reconnect control rod (11), bolt (10), washers (9)
and nuts (8). Torque nuts to 24 to 36 inch-pounds and
secure with cotterpins (7).
30. Install brackets (6) and (54), washers (5) and nuts
(5) using Wrench (T.55). Torque nuts to 24 to 36 inch-
pounds.
31. Connect tube assemblies (1), (2) and (3). Torque to
90 to 100 inch-pounds and lockwire (E.5) tube nuts.
FOLLOW ON MAINTENANCE:
Installation Fuel Pump (Task 6-3-2)
Installation Fuel Control Unit
(Task 6-1-3)
Installation Fuel Control Linkage
(Task 6-2-3)
Installation Starter-generator
(TM55-1510-209-23)
Installation Oil-to-fuel Heater
(Task 8-3-3)
Installation Oil Filter Element
(Task 8-1-4)
Installation Temperature Compensa
tor (Task 6-9-2)
Service Oil System (Chapter 1,
Section VIII)
END OF TASK
5-23/(5-24 blank)
