TM55-2840-251-23
6-6
FUEL ADAPTER AND NOZZLE ASSEMBLY (AVIM) (Continued)
6-6-5 TESTING (Cont)
1.
Leakage test. (Cont)
d. Connect supply of Calibrating Fluid (E.45) to
fixture inlet fitting (13). Torque connection to 90 to 100
inch-pounds.
e. Pressure test adapter assembly at 500 psig at a
room temperature of 68F (20C).
f. No leakage is permitted at nozzle.
g. Inspect.
h. After satisfactory test, remove adapter assembly
from fixture.
GO TO NEXT PAGE
6-28