TM55-2840-251-23
6-6
FUEL ADAPTER AND NOZZLE ASSEMBLY (AVIM) (Continued)
6-6-1 DISASSEMBLY
CAUTION
Extreme care must be exercised when
handling fuel nozzles and sheaths. Wear
clean, lint-free, disposable gloves while
handling components; fingerprints left
on orifice may produce a poor spray
pattern.
1.
Install Puller (T.32) (1) on adapter assembly (2),
align holes in sheath. Using a conventional wrench,
screw in bolt (3) and remove adapter from sheath.
Remove sheath from puller.
NOTE
Remove fuel nozzle only if functional
check
(Task
6-6-5)
indicates
that
replacement is necessary.
2. Unlock keywasher (4) and using a conventional
wrench, remove nozzle (5). Discard keywasher.
GO TO NEXT PAGE
6-24