TM55-2840-251-23
6-6
FUEL ADAPTER AND NOZZLE ASSEMBLY (AVIM) (Continued)
6-6-2 CLEANING
CAUTION
Extreme care must be exercised when
handling fuel nozzles and sheaths. Wear
clean, lint-free, disposable gloves while
handling components; fingerprints left
on orifice may produce a poor spray
pattern.
WARNING
When using compressed air for cleaning,
use approved protective equipment for
eyes face. Do not use more than 30 psig
air pressure. Do not direct air toward
yourself or another person. Failure to
comply could results in injury to eyes or
skin. In case of injury, get medical
attention.
1.
Clean carbon buildup from each fuel nozzle sheath
with cold Turco Super Carb (E.63). Use a soft brush.
Dry using filtered, compressed air.
CAUTION
Do
not
brush
nozzles
without
air
pressure, as small carbon particles
might enter and block orifices.
GO TO NEXT PAGE
6-24.1/(6-24.2 blank)